CXDI-80C Digital Radiography System

CXDI-80C Digital Radiography System

The CXDI-80C Wireless Digital Radiography System is Canon's first compact wireless flat panel detector. It gives the freedom for a wide range of diagnostic exams in a compact and convenient package

 

 

 

 

 

 

 

With 6.1 megapixels, the compact CXDI-80C Wireless Digital Radiography (DR) System has high resolution and is highly sensitive with 125 microns, reducing x-ray exposure to the patient. Weighing 5.1 pounds, the cassette size detector has an approximate 11 x 14 inch imaging area. The digital detector is useful for a wide range of patients, including infants in the Neonatal Intensive Care Unit (NICU), critically ill patients or patients with limited mobility, in wheelchairs or who require bedside care.

High Resolution and High Sensitivity
With a 125 micron pixel pitch, the CXDI-80C Wireless Digital Radiography (DR) System delivers exceptional spatial resolution. The high sensitivity of the Cesium Iodide (CsI) scintillator helps reduce the X-ray exposure to the patient. The maximum 3 second exposure time allows this digital detector to be used with tomography equipment and for other exams that may require an exposure time of up to 3 seconds.
Portable and Flexible
The CXDI-80C Wireless DR System may be used in multiple x-ray rooms. Simply "check in" the digital detector in the computer. The Infrared (IR) Communication module makes it easy to switch detectors amongst the systems. For easier transport, an optional handle is available.
Wireless Range
The wireless communication may be set for applicable strength, and, depending on the room where the CXDI-80C Wireless DR System is used, the power can be managed. Should the wireless connection be lost, the unit will automatically attempt to reconnect and to prevent image loss. Acquired images are stored locally in the on-board memory. Once reconnected, the images can be retrieved. An optional wiring unit allows images to be transferred from a panel mounted in a Bucky tray to the control computer over hard wire.
Battery
The battery charger (sold separately) can charge up to 2 batteries at a time so a fresh battery can be continuously available. Depending on the type of exam performed, each battery may last approximately 6.5 hours and takes less than 3 hours to charge. A battery power level indicator is available on the control console so you may be alert to when a fresh battery is needed. Additional batteries are available and sold separately.
CXDI Control Software NE
The CXDI-80C Wireless DR System uses the Canon CXDI Control Software NE. The software gives a wide range of selections and images can be taken within three touches. An on-screen preview image is available 3 seconds after exposure. The image processing shows subtle details of trabecular bone structure and soft tissue in the same image.
Printers and Projectors
If your imaging requirements include color or black-and-white prints in a variety of sizes, Canon printers offer a terrific blend of print quality, ease-of-use, speed, and cost-effective operation. For teaching facilities and conference rooms, Canon's high quality projectors provide LCOS (liquid crystal on silicon) technology, which is engineered to provide exceptional color, intricate details, and easy-to-read type.

 

Specifications

Detector
Method Cassette Size Detector, Scintillator & Amorphous Silicon (a-Si)
Scintillator Csl (Csl: TI)
Sensor LANMIT (Large Area New-MIS sensor and TFT)
Pixel Pitch 125 Microns
Pixels 2,192 x 2,800 Pixels (6.1 Megapixels)
Imaging Area Approximately 11 x 14 in (27.4 x 35 cm)
Standard Configuration Sensor Unit, X-Ray Interface Box, Battery Charger, Detector Check-In Unit, Wireless Access Point (Including A/C Power)
Battery
Life Approximately 6.5 Hours
Recharge Time Less Than 3 Hours
Performance Approximately 140 Images (@100 Second Cycle, 1 Second Sleep)
Image Acquisition and Processing
Image Processing Standard Advanced Multi-Frequency Processing
A/D 14-bit
Grayscale 4,096 Grayscale (12-bit)
Preview Image Approximately 3 Seconds After X-ray Exposure
Full Image Display Approximately 5 Seconds After X-ray Exposure
Data Output and Network Connection
Wireless Standard IEEE 802.11n (2.4 & 5.0 GHz)
DICOM DICOM 3.0 Compatible, Print Management Service Class (SPU), Storage Service Class (SCU), and Others
 
Electrical and Environmental
Operating Environment Sensor unit: 41-95°F (5-35°C), Humidity 30-80% RH (non-condensing)
Physical Characteristics
Dimensions (W x L x H) 12.1 x 15.1 x 0.6 in (307 x 384 x 15 mm)
(Detector unit only)
Weight 5.1 lbs (2.3 kg) (with battery)
Specifications are subject to change without notice.

 

Price: $0.00

Comments are closed